Make It: Faux Stained Glass Windows

DIY-Faux-Stained-Glass-1-Design-Crush

 

The window over my kitchen sink is one of my favorite places in the house. The few plants that I’ve managed to keep alive spend their time there, it gets great light for almost the entire day, and I love it when a breeze is blowing in. I thought I’d give it a little DIY attention by creating a sort of faux stained glass window, and I’m digging the new (not at all permanent) result!

 

DIY-Faux-Stained-Glass-2-Design-Crush

 

Materials:
plexiglass sheet cut to the size of your window
• piece of white paper or poster board
• ruler
• pencil
• stained glass paints
ScotchBlue™ Painter’s Tape
• smallish paint brush (I used one that is 3/4″ wide)
• paper towels

 

DIY-Faux-Stained-Glass-3-Design-Crush

 

Let’s get started! First thing first, get out a piece of paper or your sketchbook and get to work drawing a rough idea of what you’d like your finished window to look like. I knew that I wanted something Mondrian-inspired with 4-5 colors.

 

DIY-Faux-Stained-Glass-4-Design-Crush

 

Next you’re going to transfer your idea to a piece of paper or poster board that’s cut to the same size as the piece of plexiglass. Like I said, the sketch was just a rough idea, this will be the real thing that acts as your direct template. I started by going off of my drawing and quickly branched out to something a little more geometric. Some of my original areas were too large, so I broke them down into triangles to add some interest. But really it’s all about what looks good to your eye.

 

DIY-Faux-Stained-Glass-5-Design-Crush

 

Once you’re content with your finalized drawing, lay it behind the piece of plexiglass. (There may be sheets of acetate on both sides for protection, so make sure you remove that first.) Use a small piece of tape in each corner to affix the two together.

 

DIY-Faux-Stained-Glass-6-Design-Crush

 

Now it’s time to get taping! You’ll need to work in small sections, I tried to tape off the largest areas first and went from there. There will be lots of drying time in between taping, so even though this project may take a bit to complete (depending on the size of your window) there’s considerable downtime.

 

DIY-Faux-Stained-Glass-7-Design-Crush

 

Once you’ve taped off all of the sections you’re going to want to take a minute and think about he layout of your color palette. You don’t want any sections touching that are the same hue. Prep the edges of your plexiglass by laying paper towels (or newspaper) under the entire perimeter. Once you’re all set, squirt a bit of your first color of paint onto a section and gently paint it using horizontal strokes. It will look  a little thin and that’s okay. Make sure and paint over the edge of the tape as you go. Rinse your brush and repeat until all taped off sections are painted. Now this is important, remove the tape while the paint is still wet. It’s crucial to creating a crisp line.

 

DIY-Faux-Stained-Glass-8-Design-Crush

 

Wait 30 to 45 minutes for your newly painted sections to dry, then tape off a new set of shapes and repeat the process until they’re all filled in. At this point you might be happy and ready to call it a day. I opted to do a second coat because I’m crazy like that. This time around I kind of swirled my paint around instead of using clean strokes. Once it dries there’s more depth and unevenness, which makes it look more like stained glass.

 

DIY-Faux-Stained-Glass-9-Design-Crush

 

When you’re through remove the paper guide from the back of the plexiglass and have a good look. There might be an edge here or there that could stand a little touchup. Now it’s time to make your window happy! If there’s a ledge you might want to simply lean your work of art against the window, or use glue dots around the edges to make it a little permanent. Either way, voila!

 

DIY-Faux-Stained-Glass-10-Design-Crush

 

To help you get a head start on your own faux stained glass project, or whatever else you might have up your sleeve, we’re giving away a $50 e-GiftCard to Home Depot!

To Enter:
1. Join the Home Depot super fan program.
2. Pop back here and leave a comment letting me know you’re now a member.
3. Do it all before Tuesday, April 8th at 11:59pm CST.

We’ll randomly choose a winner the next day and let you know if you’re a winner!

 

DIY-Faux-Stained-Glass-11-Design-Crush

I am proud to be a 3M- sponsored blogger, and, as part of my responsibilities, I get the opportunity to evaluate new products from ScotchBlue Tape. Opinions are my own and additional product used in the project were selected by me.


            

Follow ScotchBlue on Facebook, Twitter, and Pinterest.
Follow Home Depot on Facebook, Twitter, and Pinterest.

11 Comments
  • Kelly

    April 2, 2014 at 7:09 pm Reply

    I’m now a member! And this DIY is absolutely gorgeous!! Love the colors!

  • Brittni

    April 2, 2014 at 8:11 pm Reply

    Just signed up. I love this idea SO much.

  • Patrick Gibson

    April 3, 2014 at 9:14 pm Reply

    I would love to do this to the windows in my two daughters’ rooms. They’re 6 and 3, and they would love this!

  • Sharon Haas

    April 4, 2014 at 12:20 pm Reply

    Thank you! I can’t wait to try this! & I am now a Home Depot super fan.

  • Ashley Hagen

    April 4, 2014 at 5:47 pm Reply

    I’m now a member!! Love this idea and know exactly where to try it!! Thx!

  • Moira

    April 4, 2014 at 10:13 pm Reply

    Great idea! Just signed up, too.

  • Sarah

    April 5, 2014 at 9:19 am Reply

    Now a Super Fan. I love this project. I might actually do this….!

  • joanna

    April 7, 2014 at 1:02 pm Reply

    i’m a member!

  • Cathy M

    April 8, 2014 at 3:53 pm Reply

    Wahoo 🙂 I signed up also. Great job on the window.

  • Kate M

    April 8, 2014 at 4:44 pm Reply

    I’m a member!

  • ShyLynn Analiese Chavez

    April 6, 2016 at 2:37 pm Reply

    I’m going to try it.

Post a Comment